Used tire processing equipment is mainly used to crush old tires, turning them into rubber powder or rubber granules for recycling, reducing environmental pollution caused by waste tires. Using the used tire processing equipment correctly can extend the equipment's service life, increase production capacity, and generate benefits.
Below, Xinyutian introduces the common improper operations during the use of used tire processing equipment:
1. Not strictly following the operating steps in the manual, arbitrarily modifying the equipment according to one's own wishes, which can damage the equipment and, in severe cases, make it unusable.
2. Loose screws on the used tire processing equipment. We can judge whether the screws are loose by some signs, such as abnormal noises and vibrations during the operation of the equipment. At this time, we need to stop the machine and check whether the loosened screws are the cause. If found, they should be tightened promptly.
3. Adding over-sized materials. If the materials are too large, they can block the feed port and affect production.
4. Neglecting equipment maintenance. Some metal parts of used tire processing equipment can easily wear out during operation. To maintain the equipment in good working condition, we need to regularly perform maintenance and upkeep, especially paying attention to the addition of lubricating oil, which is very important.
