1. The screen surface of the screen is not tensioned or damaged
The tension of the screen and the flatness of the screen surface directly determine whether the force of the material is uniform and the speed of feeding and feeding. In the long-term use process, due to the impact of the material or the wrong feeding method of rapid and slow speed, some positions of the screen surface will be loose or damaged. This is usually the culprit that causes the linear vibration screening machine to not move; replace the screen If the net is not tensioned, it will also cause the problem of slow feeding.
2. The excitation force of the vibration motor is not enough
The excitation force of the vibrating motor required by the vibrating screening machine needs to be calculated based on the specific data of the specific gravity of the material, the single processing capacity, and the screening mesh number. In the process of long-term use by customers, the vibration power of the vibrating motor will be weakened; in addition, if the type of screening material is changed or the output is increased due to the production needs, it will cause the current linear vibration screening machine to be due to The excitation force is not consistent and the problem of slow feeding occurs.
3. The screen box is not installed horizontally
The screen box of the small linear vibrating screen is the placement frame of the screen and the grid. Its level directly affects whether the screen and the grid are level. If the screen box cannot be installed horizontally and horizontally, it will cause The inclination of the screen surface causes deviations in the force of the material, which makes it impossible to flow in a straight line as scheduled.
