The equipment needs to be assembled and tested without load before leaving the factory. It can be delivered after inspection of all indicators. Therefore, after the equipment is shipped to the site of use, the user should check the entire machine according to the packing list and the complete set of equipment delivery orders. Whether the parts are complete, and whether there are any omissions in the technical documentation.
After the equipment arrives at the site, it should not be placed directly on the ground. It should be placed steadily on flat sleepers and the distance from the ground should not be less than 250mm. If stored in the open air, it should be covered with oil-proof cloth to prevent wind and rain erosion. High frequency vibrating screen
High-frequency vibrating screen is abbreviated as high-frequency screen. High-frequency vibrating screen (high-frequency screen) is composed of vibration exciter, slurry distributor, screen frame, frame, suspension spring and screen mesh.
The high frequency vibrating screen (high frequency screen) has high efficiency, small amplitude and high screening frequency. The principle of high-frequency vibrating screen is different from that of ordinary screening equipment. Because high-frequency vibrating screen (high-frequency screen) uses high frequency, on the one hand, it destroys the surface tension of the slurry and the high-speed oscillation of fine materials on the screen surface, accelerating The high density of useful minerals and the separation effect increase the probability that materials smaller than the separated particle size will contact the mesh.
