Vibrating screens are now widely used in the market, but some users still don't understand its operation and precautions. The following introduces the precautions for the use of the vibrating screen, so that users can better understand the vibrating screen equipment.
Before using the vibrating screen equipment, check that the connecting bolts of each part are complete, fastened and intact, check whether the exciter is intact, check whether the spring vibrating screen is damaged, missing, or broken, and check whether the triangle belt is tensioned or broken. , Check whether the sieve plate is damaged, check whether the sieve plate is blocked by debris, and the screen surface should be smooth and not damaged or loose. Regularly check whether the coarse mesh, fine mesh and spring are fatigued and damaged, and whether various parts of the fuselage are damaged due to vibration. The parts that need to be lubricated need to be lubricated.
After turning on the vibrating screen, stand by the control box and monitor the equipment to start and stop immediately if abnormalities are found. After the start-up is normal, check whether the nozzle of each vibrating screen is blocked or falling off. Always observe the temperature and sound of the motor, often observe the sound of the exciter, and observe whether the vibration of the sieve is consistent with the four corners and whether the triangle belt is leaking. Loose or fall off, often observe the effect of dehydration and release.
When parking, observe whether the sieve collides with other equipment when passing through the resonance point. When the following situations are found, it is necessary to stop immediately. When encountering personal safety or equipment safety, when there are too many debris on the screen area and the unloading is not smooth, the screen is broken in a large area, the chute under the screen is seriously blocked, the screen box is severely swinging and other abnormal conditions. After the problem is eliminated, the vibrating screen can be restarted.
