During the production process, the environmental friendly normal temperature method are adopted, which will not cause any pollution to the environment. The operation is very simple, customers can grasp without more professional knowledge. We have details maintain record for the wearing parts, and the special equipment designed for repair rollers. tire breaker have multiple models can be choosed to meet customers diversity demand. The production capacity ranges from 200kg/h-2000kg/h. XYT machinery engineers can recommend customized models according to needs.

Rubber cracker mill is mainly used for cracking rubber and waste tires scrap.Cracker mill is mainly machine for tire recycling plant.

1.The cracker rollers are made of cast steel with wear-resistant hard surface.The rear roller is grooved.

2.On the working surface of rollers,welding wear-resisting layer is up to 10mm.The rollers are free to maintain and repair in one year.

3.The bored rollers can be cooled through cooling water.

4.The two rollers rotate with different speeds,so that rubber material can be processed.

5.The cracker is equipped with overload protection device and emergency braking device.

Technical Data

Model	XKP400	XKP450	XKP610
Specification	XKP400	XKP450	XKP610
Front roller (mm)	400	450	510
Rear roller (mm)	400	450	610
Roll length (mm)	600	800	800
Rollers speed ratio	1:1.38	1:1.43	1:2
Front roll linear speed (m/min)	22.29	24.38	23.79
Max gap (mm)	10	10	16
Sliding/rolling bearing	Sliding bearing	Optional	Optional
power (kw)	45	75	110/132/160
Weight (kg)	7500	11500	17500
Dimension (mm)	392018501720	506019301550	573922701560
Production (0.5-5mm)	200-500kg/h	300-700kg/h	600-1200kg/h

Machine structure

1.The machine is mainly composed of base, frame, front and rear rollers, coupling, reducer, distance adjusting device, cooling device, safety switch and electrical control system.

2.The roller is made of alloy chilled cast iron and cast steel. The working surface and shaft diameter of the cast steel roller are overlaid with cemented carbide materials. The working surface and shaft diameter are ground and have high hardness and wear resistance. The rear roll is a grooved roll, and the groove forms an included angle of 6 ° with the axis of the roller.

3.The distance adjusting device is a side vertical worm gear adjustment, which is labor-saving and beautiful.

4.The roller temperature regulating device can pass steam or cooling water into the roller to adjust the surface temperature of the roller to meet the process requirements.

5.The machine is equipped with safety device. In case of emergency, press the emergency stop button to stop immediately, which is safe and reliable.

6.Transmission mode: the main motor is connected with the high-speed shaft of the reducer through the coupling, and the low-speed shaft of the reducer drives the rear roller through the coupling, and makes the front and rear rollers on a certain line through a pair of speed ratio gears relative operation at speed.

Structure feature

1.There are two kinds of materials can be choosed for crusher rollers--cast iron and cast steel.The roller made of chilled cast iron with vanadium and titanium alloys is hard and anti-wear.The working surface of cast steel roller choose welding cemented carbide.Its rear roller is processed in groove type.Its driving part is equipped with hardened reducer.All of those characters make crusher work in good performance and lower noise

2.It is equipped with an overload protection device to prevent the major components from being damaged due to overloading.

3.It is equipped with an emergency device.When an emergency accidents happens,press the safety button,the machine will stop immediately.

4.It is equipped with auto grease device for bearing,that operated convenient and easily.

Rollers grinding machine

It is applicable for repair the worn rollers, rollers no need disassembled from breaker when repair them, put rollers grinding machine onto rollers to grind can finish working.