1. It is recommended to make a support frame to hang the spare screen surface.
2. Check the sieve compression device every shift, if it is loose, it should be compressed.
3. Check the sealing strip frequently, and replace it if it is worn or defective.
4. The screen grid should be taken out frequently, and check whether the screen surface is damaged or uneven, whether the screen hole is blocked, etc.
5. Check each shift to see if the connection of the feed box is loose. If the gap becomes larger, it will cause a collision and the equipment will break.
6. Although the vibrating screen does not need lubricating oil, it still needs to be overhauled once a year, replacing the liner, and trimming the two screen surfaces. The vibration motor should be removed for inspection, and the motor bearing should be replaced with oil. If the bearing is damaged, replace it
7. Check the sieve support device every shift to observe whether the hollow rubber pad has obvious deformation or degumming. When the rubber pad is damaged or excessively flattened, two hollow rubber pads should be replaced at the same time.
The daily maintenance of the vibrating screen includes the surface of the vibrating screen, especially the fastening of the vibrating screen, and the vibrating screen should be tightened in time when it is loose. The vibrating screen regularly cleans the surface of the screen. The vibrating screen should promptly repair, rust and paint the peeling parts of the paint. The exposed processing surface should be coated with industrial petroleum jelly to prevent rust.
