The detailed technical process of waste tire refining: first collect a large number of waste tires, and send them to the pyrolysis reactor of the waste tire refining equipment through an automatic feeder, and then seal the feed inlet of the waste tire refining equipment. After these preparations are completed, the reaction kettle of the waste tire refining equipment can be ignited and heated. The waste tires begin to crack into oil and gas under the action of high temperature. The oil and gas first pass through the buffer tank, and then the oil and gas enter the condensation stage. The condensation stage is divided into three stages, vertical tube condenser, horizontal condenser and condensation tower. After the oil and gas three-stage condensation system is cooled, it will become fuel oil. The non-condensable combustible gas can directly heat the pyrolysis reactor of the waste tire refining equipment, and the excess exhaust gas can also be collected and stored for other industrial heating.
The refining technology of waste tires plays an important role in the treatment of waste tires. Through the treatment of the detailed technical process of waste tire oil refining, high-value products are obtained: pyrolysis oil, carbon black, steel wire, etc. These products have corresponding uses.
